17 | Automatic cleaning - iCareSystem
152 / 188 Original instructions for use
7. Open the cooking cabinet door.
8. Close the cooking cabinet door.
>> After that, the cooking system is ready for use again. The home screen will
appear.
TIP
If a power failure occurs during automatic cleaning, automatic cleaning will be
interrupted. Once power has been established again, automatic cleaning will
resume.
17.7 Forced cleaning after operating hours
If you have activated forced cleaning, you will be prompted to clean the cooking
system after a defined time. You can only continue working with the cooking
system once cleaning is complete.
1. Press this button:
2. Press this button: Cleaning
3. Press this button: Forced cleaning
4. To activate forced cleaning, press this button: ON
5. To set the time after which you want to be prompted to clean the cooking
system, press this button: Time to cleaning request Please note that this time
represents how long the cooking system has been in operation, not how
much total time has passed.
6. Set the time anywhere between 1– 24 hours.
7. To set the number of hours by which cleaning can be postponed following a
prompt, press this button: Forced cleaning delay time
8. Set the time anywhere between 1 – 24 hours.
>> The footer will indicate how many hours of operation are left until cleaning
will be required.
17.8 Cleaning schedule
Use a cleaning schedule to specify the weekdays on which you want Forced
cleaning [}152] to occur.
1. Press this button:
2. Press this button: Cleaning
3. Press this button: Cleaning schedule
4. In order to define how the cooking system behaves when a cleaning request
is issued, press this button: Scheduled cleaning time
To Next Page
Loading...
