14 | Settings
Original instructions for use 113 / 188
2. To display the racks in descending order, press: 321
>> The setting is adopted immediately.
14.6.1
0
Load calculation for manual programs in iProductionManager
Use this setting to specify whether cooking time should be extended on manual
programs in iProductionManager when the door is left open during cooking and
the measured energy loss is significant enough that the desired cooking results
cannot be achieved using the current settings.
1. To activate the function, press this button:Load calculation for manual
programs in iProductionManager ON
14.6.1
1
Hold time climate
This setting allows you to specify how long you want the cooking system to
maintain the climate within the cooking cabinet when you are not preparing
dishes using iProductionManager.
1. Press this button: Climate hold time
2. Select the desired value on the scale.
>> The hold time will be adjusted immediately.
NOTE
A shorter holding time will save energy.
14.6.1
2
iProductionManager 3D
Use this setting to specify that you want to load two trays per level in
iProductionManager. Each tray will be monitored separately. Please note that no
more than 12 levels can be displayed at once.
To Next Page
Loading...
