Rational iCombi Pro - Process Canceled; Error Detected

14 | Settings
Original instructions for use 107 / 188
2. Press this button: Sound
3. Press the sound you would like to use.
> The sound will be played.
4. To turn off sounds, press this button:OFF
5. Go to the icon bar and press: to return to the overview.
6. If you want the sound to play continuously until the cooking system has been
loaded or the action has been confirmed, press this button: Continuous
playback ON
7. If you only want the sound to play for a certain length of time, press this
button: Continuous playback OFF
> The Tone length field will be activated.
8. Set the length anywhere between 0–180 seconds.
9. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.
14.4.5 Process canceled / error detected
This is where you select the sound or melody that the cooking system uses to
indicate that an error has been detected. There are 37 sound options to choose
from.
1. Press this button: Proc. interrupt / Error found
2. Press the sound you would like to use.
> The sound will be played.
3. To turn off sounds, press this button:OFF
4. Tap in the icon bar to return to the overview screen.
5. If you want the sound to play continuously until the cooking system has been
loaded or the action has been confirmed, press this button: Continuous
playback ON
6. If you only want the sound to play for a certain length of time, press this
button: Continuous playback OFF
> The Tone length section will be activated.
7. Set the length anywhere between 0 - 180 seconds.
8. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.