16 | Automatic cleaning - iCareSystem (chemical storage)
Original instructions for use 145 / 188
4. Open the cooking cabinet door.
5. Remove any containers and trays from the cooking cabinet.
6. Close the cooking cabinet door.
7. The cool down function [}63] will be started in order to lower the cooking
cabinet temperature.
8. Automatic cleaning will start.
9. When automatic cleaning is finished, a signal tone will sound.
10. Dispose of empty cartridges in the forced cleaning recycling bin.
TIPS
n
If foam forms in the cooking cabinet during automatic cleaning even though
you have used the recommended amount of Active Green cleaner, you
should set the foam switch. If foam continues to build up, please contact
your RATIONAL Service Partner.
16.7 Canceling automatic cleaning
You can cancel all automatic cleaning programs at any time.
1. Press and hold this button:
> You will be asked if you really want to cancel cleaning. The display will
indicate how long cancellation will take.
2. Press this button:
>> Automatic cleaning will be canceled.
TIP
If a power failure occurs during automatic cleaning, automatic cleaning will be
interrupted. Once power has been established again, automatic cleaning will
resume.
16.8 Forced cleaning after operating hours
If you have activated forced cleaning, you will be prompted to clean the cooking
system after a specified time. You can only continue working with the cooking
system once cleaning is complete.
1. Press this button:
2. Press this button: Cleaning
3. Press this button: Forced cleaning after operating hours
4. To activate forced cleaning, press this button: ON
To Next Page
Loading...
