16 | Automatic cleaning - iCareSystem (chemical storage)
146 / 188 Original instructions for use
5. To set the time after which you would like to be prompted to clean the
cooking system, press this button: Time until cleaning prompt Please note
that this setting refers to operating time, not total time elapsed.
6. Set the time anywhere between 1 – 24 hours.
7. To set the number of hours by which cleaning can be postponed following a
prompt, press this button: Delay period for forced cleaning
8. Set the time anywhere between 1 – 24 hours.
9. Press this button: . You can now select from either standard or custom-
created cleaning programs.
10. Press this button: to switch automatic cleaning start on or off.
11.
>> The footer will indicate how many hours of operation are left until cleaning
will be required.
To Next Page
Loading...
