15 | Kitchen management
134 / 188 Original instructions for use
3. Next to Transfer HACCP data automatically, press the button: ON
>> Now HACCP data will be transmitted automatically upon completion of each
cooking path. You can view that data on connectedcooking.com or through
the ConnectedCooking app.
15.2 Connecting units to a network
The following options are available when you network your unit:
n
Operate both units of a Combi-Duo installation on just one unit.
n
Connect the units with ConnectedCooking.
If you would like to network units of a Combi-Duo installation, please contact
your RATIONAL service partner.
15.2.1 Establish WLAN connection
Connecting the unit to a wireless network that requires you to log in via a
website will not allow the unit to establish a wireless connection.
1. Press this button:
2. Press this button: Network
3. To activate the function, press this button: ON
4. Press this button: WiFi
> A list of all available wireless networks is shown. Wireless networks will be
shown in descending order of signal strength.
5. Select the wireless network you wish to use.
> You will be prompted to enter the password for the wireless network.
6. To confirm, press this button:
> Once the connection has been established successfully, the following symbol
appears in the footer:
> The wireless network will be displayed at the top of the list of available
wireless networks.
7. To view connection details, click this button beside the wireless network: V
8. To disconnect from the network, go to the connection details and press this
button: Disconnect
9. Tap in the icon bar to return to the network settings overview screen.
>> The name of the wireless network will be displayed in the Wireless network
section.
To Next Page
Loading...
