15 | Kitchen management
136 / 188 Original instructions for use
1. Press this button:
2. Press this button: Network settings
3. Press this button: LAN
4. Press this button: IP network
5. Enter the IP address.
6. Press this button: IP gateway
7. Enter the IP gateway address.
8. Press this button: IP subnetmask
9. Enter the IP subnetmask.
10. To assign the network configuration to clients via a server, activate DHCP.
Press this button: ON
> IP address, gateway and DNS will now be configured automatically.
11. Press this button: DNS 1 (primary)
12. Enter the DNS server address.
15.3 ConnectedCooking
ConnectedCooking is RATIONAL’s state-of-the-art networking solution.
Whether you own one RATIONAL cooking system or several, ConnectedCooking
opens up a wealth of new and convenient possibilities. All you have to do is
connect your RATIONAL cooking system to a network and then visit
connectedcooking.com to register.
In ConnectedCooking, you can see the online status, cleaning details, operating
statistics and whether HACCP specifications are complied with at a glance. The
following features are also available:
n
Push notifications
Any time a cooking system is ready to load, finishes a cooking process, or
needs service, you’ll receive real-time information no matter where you are.
n
Transfer and manage cooking paths
Transfer tried-and-tested cooking paths automatically to all units in your
business.
n
Automatic software updates
Software updates are always provided automatically and at no cost to you.
At connectedcooking.com, you will also find extensive recipe libraries, tips and
tricks from our professionals and a wide range of how-to videos
To Next Page
Loading...
