11 | Programming mode
90 / 188 Original instructions for use
cooking step Cooking parameter Additional functions
n
Cooking time
n
Core temperature
Hot Air
n
Cooking cabinet
humidity
n
Cooking cabinet
temperature
n
Cooking time
n
Core temperature
n
Delta-T cooking
n
Fan speed
n
Steam injection
1. Adjust the cooking step as desired.
2. To save your changes, press this button:
Default start times and program images
a Use this function once you have imported images [}119].
1. To assign a default start time to a program, press this button:
2. Press this button: Default start time
3. Press this button:ON
4. Enter the start time.
5. To confirm, press this button:
6. To assign an image to the program, press this button:
7. Press this button: Select program image
8. Select an image.
9. To confirm, press this button:
10. To set a low fan level after loading, press this button: .
Saving a program
1. To give the profile a name, press the button:
2. Enter a name.
3. To save your program, press the button:
>> The system will check the program. If all cooking parameters are fully defined
and logically organized, the program will be saved and added to the list of
available programs.
>> If the program contains an error, that section of the program will be marked.
Fix the error before saving the program again.
To Next Page
Loading...
