11 | Programming mode
92 / 188 Original instructions for use
2. Press this button:
> Any editable cooking parameters and additional functions for that cooking
path will be displayed. Standard settings for the cooking path are marked
with this symbol:
3. Adjust the cooking parameters as desired.
4. To save your changes, press this button:
> The individual cooking steps will be displayed again.
Default start times and program images
a Use this function once you have imported images [}119].
1. To assign a default start time to a program, press this button:
2. Press this button: Default start time
3. Press this button:ON
4. Enter the start time.
5. To confirm, press this button:
6. To assign an image to the program, press this button:
7. Press this button: Select program image
8. Select an image.
9. To confirm, press this button:
10. To set a low fan level after loading, press this button: .
To Next Page
Loading...
