14 | Settings
Original instructions for use 123 / 188
Start Network Wizard
The Network Wizard helps you set up the network settings.
1. Press this button: : Start Network Wizard
> You will then be asked whether you want assistance with network settings.
The Wizard can help you set up either a wireless connection or a LAN
connection.
2. Press this button: DHCP active: OFF will allow you to edit the following
network settings:
n
IP address
n
IP gateway
n
IP subnetmask
n
DNS 1
n
MAC address
1. Press this button: DHCP active: ON will allow you to edit the following
network settings:
n
MAC address
You can run network diagnostics to help troubleshoot connection issues.
1. Press this button:
Perform network diagnostics
to see if your cooking
system is connected to the network.
To Next Page
Loading...
