For uniform spreading of the spreading material, a constant forward speed must be applied in
manual operating mode.
Spreading in different operating modes is described in 5 Spreading operation.
Menu Meaning Description
AUTO km/h + AUTO kg Selecting automatic mode with automatic
weighing
Page 94
AUTO km/h Selecting automatic mode Page 96
MAN km/h Adjustment of forward speed for manual mode Page 97
MAN scale Dosing slide adjustment for manual mode
This operating mode is suitable for spreading
slug pellets or fine seeds.
Page 97
Operating mode selection
u
Start the machine control unit.
u
Access the menu Machine settings > AUTO/MAN mode.
u
Select the desired menu item from the list.
u
Press OK.
u
Follow the instructions on the screen.
We recommend having the flow factor displayed in the working screen. By doing so, you can
observe the mass flow control during spreading. See 4.10.2 Display configuration.
• Important information on the use of operating modes for spreading operations is provided in
chapter 5 Spreading operation.
AUTO km/h + AUTO kg: automatic mode with automatic mass flow control
The AUTO km/h + AUTO kg operating mode continuously adjusts the fertilizer quantity during
spreading operation according to the forward speed and the flow behavior of the fertilizer. By doing so,
an ideal dosing of the fertilizer can be achieved.
4. Operation
QUANTRON-A AXIS/MDS 5902662
63
To Next Page
Loading...
Need help?
General
