Raven DirecSteer - Page 168

Chapter7
Code ID Description Recommended Actions
522260 .31
No guidance part-
ner.
Field computer is not registered as a guidance
partner.
1. Cycle power to the Raven field computer or
UTdisplay.
2. Update the field computer software version.
522261 .31
No steering con-
trol unit (SCU)
detected.
1. Check cabling and connections to the steering
partner (steering valve).
2. Cycle power to the machine.
3. Update the steering partner (steering valve) firm-
ware.
4. Check for CAN communication errors between
the steering valve and the steering guidance con-
troller (SGC) including CANterminators and wir-
ing.
522262
.11
DirecSteer over-
load error.
DirecSteer is unable to move for too long. For
example, holding the steering wheel when the unit is
trying to steer.
1. DirecSteer steering effort is too high.
i. Ensure that the machine speed is at least
1.6 km/h [1 mph].
ii. Check for obstructions to steering wheel
movement.
2. Check power and ground connections.
3. Check cabling for shorts or loose connections.
4. Check the machine battery voltage.
.12
DirecSteer high
temperature
error.
Internal temperature of the unit is too high.
1. Disable or shutdown DirecSteer and allow unit
to cool down.
2. Check power and ground connections.
3. Check steering wheel for binding or increased
steering effort.
154