What to do if RaySat Antenna system does not power on?
If the RaySat Antenna system fails to power on, take these steps: First, ensure that the ACU and receiver are powered on. Next, check for any blown fuses. Then, verify that all cables are connected properly. Finally, confirm that the vehicle battery has been reconnected correctly.
Why is my RaySat Antenna ACU not locking on satellite?
If the ACU is not locking onto the satellite, first ensure that the coaxial cable connections are installed properly. Next, confirm a clear line of sight to the satellite. Then, verify that the receiver is tracking on the satellite from the Setup Menu of the receiver. Also, check that the radome is free of obstructions, such as water, snow, ice, or debris. If necessary, clean the radome with a soft cloth and water.
What to do if RaySat Gilat SR1500 picture is scrambled, partial, or freezing?
If the picture is scrambled, partial, or freezing, ensure that the coaxial cable connections are installed properly. Confirm a clear line of sight to the satellite. Verify that the receiver is tracking on the satellite from the Setup Menu of the receiver. Check that the radome of the antenna is free of any obstructions such as water, snow, ice, or debris.
What to do if RaySat Antenna system continually resets?
If the system continually resets, verify that all connections are installed properly. Also, check for proper wiring to the vehicle’s power source and ensure that 12 VDC is being supplied to the IDU.
Why is there intermittent picture for short intervals on my RaySat Antenna?
If you are experiencing intermittent picture for short intervals, ensure that all video connections are installed properly. Confirm a clear line of sight to the satellite. Verify that the receiver is tracking on the satellite from the Setup Menu of the receiver. Check that the radome of the antenna is free of any obstructions such as water, snow, ice, or debris.
What to do if RaySat Antenna system does not work in motion?
If the system does not work in motion, ensure that all cable connections are installed properly. Confirm a clear line of sight to the satellite. Verify that the receiver is tracking on the satellite from the Setup Menu of the receiver.
Why is there a black or blue screen on television with RaySat Gilat SR1500?
If you see a black or blue screen on your television, verify that the IDU and receiver are powered on. Ensure that all video connections are installed. Check for proper television settings.
How to fix snowy television picture on RaySat Gilat SR1500 Antenna?
To resolve a snowy television picture, first verify that television settings are correct. Then, ensure correct channel configuration (channel 3 / 4, or A/V input). Finally, make sure video cables are installed properly.
Why certain channels do not work or only preview channels are visible on RaySat Gilat SR1500 Antenna?
If certain channels do not work or only preview channels are visible, verify your channel package with your satellite TV provider. Check the availability of local channels in your area. Ensure proper activation of the satellite receiver.
What to do if RaySat Gilat SR1500 Antenna remote control does not work?
If the remote control is not working, ensure proper placement of the IR transmitter (if RF to IR converter has been installed). Also, try installing new batteries.
To Next Page
General