70 | Gilat Satellite Networks | Confidential and Proprietary Information
Antenna Status Bits
Antenna statuses are expressed in some system messages as Hexadecimal bit masks.
This table lists the corresponding explanations.
Table 29: Antenna Status Bits
Motor current limit reached
Temperature limit reached
Low voltage condition detected
Satellite signal OK. If 0, then signal drop is detected
Horizontal polarization selected (or LHCP)
Satellite signal has been lost. The antenna is in scanning mode
Azimuth motor overload failure
Tx initialization failure
Incorrect Tx polarization position
TV mode – transmission is disabled
Circular polarization is selected
To Next Page
Loading...