MANUAL – REFLEX EZ-TRAC™ | 48
Figure 47 Memory Full
The Memory Full message appears at the start of a new survey if
there is not enough memory left in the
REFLEX™ EZ-COM unit to store
the new survey.
Select YES to delete the oldest survey of that survey type (Single
Shot, Multi Shot or Orientation). The Delete Oldest message below is
displayed.
Select NO to return to the MAIN menu without deleting any surveys.
For instructions on how to move files to a PC, please refer to the
chapter Transfer Survey Files.
Figure 48 Delete Oldest
The Delete Oldest message appears if YES is selected in the
Memory Full message.
Select YES to delete the oldest survey of that type (Single Shot, Multi
Shot or Orientation). If sufficient memory is not made available, the
Memory Full message will appear again. Otherwise the next screen in
the survey procedure will be displayed.
The most effective way to free memory is to move all survey files to a
PC. Select NO; the Free Memory message below will appear.
To Next Page
Loading...
