Drive System Rexroth IndraDrive C with 3‑Axis Converter HCT02
1 … 4 Motors (1: Powerful main drive; 3–4: Secondary drives)
24V 24V supply
DST Transformer (optional)
F Fuses
HCT02 3-axis converter
HMI External operator panel
HNF Mains filter (optional)
HNL Mains choke (optional; you can do without mains choke in the case of
reduced performance)
K1 Mains contactor
RB External charging resistor
Fig.1-2: Drive System Rexroth IndraDrive C with 3‑Axis Converter HCT02
Bosch Rexroth AG DOK-INDRV*-HCQ-T+HMQ-T-PR03-EN-P
Rexroth IndraDrive Drive Controllers HCQ, HCT
8/145
System Presentation
To Next Page