Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 26
password work according to top-down order, if you do not set trial 1 password,only set trial 2-4,it
will work according to 2-4 order.
The operation of Data Initial,Inner Format,Wipe Cache should not crack the password.
Setting：Press“ ”to get into “Probation Set”， press“ ”、“ ” to
move cursor to which you want to choose.Press“ ”to get into，and then press“ ”,
input the new number，press ― ‖ to save.The screen displays：
There is a mark“*”before every level password，if not，the password will not work normally.
If you have setted all passwords，press“ ”,the screen will display:
When password expires，the screen will display：
Connect engraving machine manufacturers to get password,press“ ”, the screen will
display：
Trial password
选择 U 盘文件
*Trial2passwor
* Trial3passwor
* Trial4passwor
*Trial1passwor
U 盘文件件 WENJIAN
The system is out of testing
time,please contact the
factory to get more testing
time or unlock!
Please input trail 1 password:
You must restart the system
after setting trial password.
To Next Page
Loading...
