Bit Switches
SM 63 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
“Original 2” can be selected in addition to the “Text”,
“Text/Photo” and “Photo” modes.
System Switch 1A [SP No. 1-101-027]
No. FUNCTION COMMENTS
0-7
LS RX memory remaining
refresh value setting
Sets a value of 4K.
If the amount of memory remaining falls below 4K,
documents received in memory are printed to
create more space in memory.
Initial value: 0x80 (512K)
00-FF (0-1020 KB: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION COMMENTS
0
RTI/CSI/CPS code display
0: ON
1: OFF
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
1-7
Not used
Do not change these settings.
System Switch 1E [SP No. 1-101-031]
No FUNCTION COMMENTS
0
Communication after the
Journal data storage area has
become full
0: Impossible
1: Possible
0: When this switch is on and the journal history
becomes full, the next report prints. If the journal
history is not deleted, the next transmission cannot
be received. This prevents overwriting
communication records before the machine can
To Next Page
Loading...
Need help?
General Specifications
