Ricoh Aficio MP C2050 Service Manual

System Service Mode
SM Appendix 9-233 D037/D038/D040/D041
Appendix:
SP Mode
Tables
Sets the FTP port number used when image files to the Scan Router Server.
IP Address (Primary)
Range: 000.000.000.000 to
255.255.255.255
002
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Delivery Error Display Time
[0 to 999 / 300 / 1 second /step]
006
Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
IP Address (Secondary)
Range: 000.000.000.000 to
255.255.255.255
008
Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
Delivery Server Model
[0 to 4/ 0 / 1 /step]
009
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr Capability
[0 to 255 / 0 / 1 /step]
Changes the capability of the registered that the I/O device registered.
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
010
Bit3 = 1 Fax RX delivery function exists

Ricoh Aficio MP C2050 Specifications