5860 [SMTP/POP3/IMAP4] *CTL -
020
Partial Mail Receive Timeout [1 to 168 / 72 / 1hour/step]
Sets the amount of time to wait before saving a mail that breaks up during reception. The
received mail is discarded if the remaining portion of the mail is not received during this
prescribed time.
021
MDN Response RFC2298 Compliance [0 or 1 / 1 / – ]
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No
1: Yes
022
SMTP Auth. From Field Replacement [0 or 1 / 0 / – ]
Determines whether the FROM item of the mail header is switched to the validated
account after the SMTP server is validated.
0: No. "From" item not switched.
1: Yes. "From" item switched.
025
SMTP Auth. Direct Setting [0 or 1 / - / – ]
Selects the authentication method for SMPT.
Bit switch:
•
Bit 0: LOGIN
•
Bit 1: PLAIN
• Bit 2: CRAM MD5
• Bit 3: DIGEST MD5
• Bit 4 to 7: Not used
• This SP is activated only when SMTP authorization is enabled by UP mode.
026 S/MIME: MIME Header Setting
Selects the MIME header type of an E-mail
sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
3. SP Mode Tables
330
To Next Page
Loading...
