001 On Board NIC *CTL
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On
board NIC" is limited only for the NRS or
LDAP/NT authentication.
• Other network applications than NRS or
LDAP/NT authentication are not
available when this SP is set to "2".Even
though you can change the initial
settings of those network applications,
the settings do not work.
002 On Board USB *CTL
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5987 [Mech Counter]
001 0: OFF / 1: ON *ENG
This SP detects that a mechanical counter
device is removed. If it is detected, SC610
occurs.
5990
[SP Print Mode]
Prints out the SMC sheets.
Main SP Tables-5
337
To Next Page
Loading...
Need help?
General
