007 Temp.:Lower Delta:Center:Sp.1 *ENG [0 to 200 / 40 / 1deg/step]
008 Temp.:Lower Delta:End:Sp.1 *ENG -
009 Temp.:Upper Delta:Center:Sp.1 *ENG [0 to 200 / 15 / 1deg/step]
010 Temp.:Upper Delta:End:Sp.1 *ENG -
011 Temp.:Lower Delta:Press:Sp.1 *ENG [0 to 200 / 95 / 1deg/step]
012 Rotation Time:Sp.1 *ENG [0 to 200 / 0 / 1sec/step]
013 Temp.:Lower Delta:Center:Sp.2 *ENG [0 to 200 / 40 / 1deg/step]
014 Temp.:Lower Delta:End:Sp.2 *ENG -
015 Temp.:Upper Delta:Center:Sp.2 *ENG [0 to 200 / 15 / 1deg/step]
016 Temp.:Upper Delta:End:Sp.2 *ENG -
017 Temp.:Lower Delta:Press:Sp.2 *ENG [0 to 200 / 95 / 1deg/step]
018 Rotation Time:Sp.2 *ENG [0 to 200 / 0 / 1sec/step]
019 Feed Permit Time *ENG [0 to 200 / 60 / 1sec/step]
020 Temp.:Lower Delta:Center:Sp.3 *ENG [0 to 200 / 40 / 1deg/step]
021 Temp.:Lower Delta:End:Sp.3 *ENG -
022 Temp.:Upper Delta:Center:Sp.3 *ENG [0 to 200 / 15 / 1deg/step]
023 Temp.:Upper Delta:End:Sp.3 *ENG -
024 Temp.:Lower Delta:Press:Sp.3 *ENG [0 to 200 / 26 / 1deg/step]
025 Rotation Time:Sp.3 *ENG [0 to 200 / 0 / 1sec/step]
026 Temp.:Lower Delta:End:LT *ENG [0 to 200 / 100 / 1deg/step]
027 Temp.:Upper Delta:End:LT *ENG [0 to 200 / 100 / 1deg/step]
1105
[Print Target Temp.]
Roller Type Center and Ends: Heating roller, Pressure roller
Paper Type: Plain, Thin, Thick, OHP, Middle Thick, Special.
001 Plain1:FC:Center *ENG [100 to 180 / 155 / 1deg/step]
3. SP Mode Tables
24
To Next Page
Loading...
Need help?
General
