023 Rotation Time:BW:Warm *ENG [0 to 200 / 0 / 1sec/step]
024 Temp.:Delta:Hot:BW:Center *ENG [0 to 200 / 85 / 1deg/step]
025 Temp.:Delta:Hot:BW:End *ENG -
026 Temp.:Delta:Hot:BW:Press *ENG [0 to 200 / 45 / 1deg/step]
027 Rotation Time:BW:Hot *ENG [0 to 200 / 0 / 1sec/step]
101 Temp.:Delta:Cold:BW2:Center *ENG [0 to 200 /75 / 1deg/step]
102 Temp.:Delta:Cold:BW2:End *ENG -
103 Temp.:Delta:Cold:BW2:Press *ENG [0 to 200 / 45 / 1deg/step]
104 Rotation Time:BW2:Cold *ENG [0 to 200 / 0 / 1sec/step]
105 Temp.:Delta:Warm:BW2:Center *ENG [0 to 200 /85 / 1deg/step]
106 Temp.:Delta:Warm:BW2:End *ENG -
107 Temp.:Delta:Warm:BW2:Press *ENG [0 to 200 / 45 / 1deg/step]
108 Rotation Time:BW2:Warm *ENG [0 to 200 / 0 / 1sec/step]
109 Temp.:Delta:Hot:BW2:Center *ENG [0 to 200 /85 / 1deg/step]
110 Temp.:Delta:Hot:BW2:End *ENG -
111 Temp.:Delta:Hot:BW2:Press *ENG [0 to 200 / 45 / 1deg/step]
112 Rotation Time:BW2:Hot *ENG [0 to 200 / 0 / 1sec/step]
1102
[Feed Permit Setting]
Specified the settings of the paper feeding timing.
001 Temp.:Lower Delta:Center *ENG [0 to 200 / 40 / 1deg/step]
002 Temp.:Lower Delta:End *ENG -
003 Temp.:Upper Delta:Center *ENG [0 to 200 / 15 / 1deg/step
004 Temp.:Upper Delta:End *ENG -
005 Temp.:Lower Delta:Press *ENG [0 to 200 / 95 / 1deg/step]
006 Rotation Time *ENG [0 to 200 / 0 / 1sec/step]
Main SP Tables-1
23
To Next Page
Loading...
Need help?
General
