1129
[CPM Down Setting]
-
001 Low:Down Temp.:End *ENG [-125 to 0 / -60 / 1deg/step]
002 Low:Up Temp.:End *ENG [-125 to 0 / -55 / 1deg/step]
003 Low:Judging Interval:End *ENG [1 to 250 / 10 / 1sec/step]
101 High:1st CPM :sensor2 *ENG [10 to 100 / 20 / 1%/step]
102 High:2nd CPM :sensor2 *ENG [10 to 100 / 15 / 1%/step]
103 High:3rd CPM :sensor2 *ENG [10 to 100 / 10 / 1%/step]
104 High:1st Temp.:sensor2 *ENG [0 to 250 / 170 / 1deg/step]
105 High:2nd Temp.:sensor2 *ENG [0 to 250 / 175 / 1deg/step]
106 High:3rd Temp.:sensor2 *ENG [0 to 250 / 180 / 1deg/step]
1131
[Continuous Print Mode Switch]
Sets the permission for paper to feed.
001 Feed Permit Condition Setting *ENG
[0 to 2 / 0: Productivety Mode / 1/
step]
0: Productivety Model
1: Fusing Quality 1
2: Fusing Quality 2
1132
[Maximum Duty Switch]
Switches maximum fixed duty level and power control.
001 Control Method Switch *ENG
[0 or 1 / 1: Power Control / 1/step]
0: Fixed Duty
1: Power Control
003 Power Offset *ENG [-4 to 4 / 0 / 1/step]
012 Voltage Detection *ENG [0.0 to 650.0 / 0.0 / 0.1V/step]
013 Temp.:Threshold Value *ENG [0 to 200 / 0/ 1deg/step]
3. SP Mode Tables
64
To Next Page
Loading...
