004 Kn: Lower *ENG
Sets the upper limit of valid range of
normalized value for normal reflection light
using the sensitivity correction (K5).
[0.00 to 1.00 / 1.00 / 0.01/step]
005 Kn: Upper *ENG
Sets the lower limit of valid range of
normalized value for normal reflection light
using the sensitivity correction (K5).
[0.00 to 1.00 / 0.10 / 0.01/step]
006 K5: Upper *ENG
Sets the upper limit of the sensitivity correction
coefficient (K5).
[0.00 to 10.00 / 5.00 / 0.01/step]
007 K5: Lower *ENG
Sets the lower limit of the sensitivity correction
coefficient (K5).
[0.00 to 1.00 / 0.50 / 0.01/step]
008 K5: Target Point *ENG
Sets correction point (Kn) for sensitivity
correction coefficient (K5).
[0.00 to 1.00 / 0.15 / 0.01/step]
009 K5: Target Voltage *ENG
Sets correction point (delta Vsp_dif_Dash) for
sensitivity correction coefficient (K5).
[0.00 to 5.00 / 1.63 / 0.01V/step]
012 Corrct Coef:C *ENG
Sets color-difference correction coefficient (C)
for delta Vsp_Dif_Dash.
[0.500 to 1.500 / 0.925 / 0.001/step]
013 Corrct Coef:M *ENG
Sets color-difference correction coefficient (M)
for delta Vsp_Dif_Dash.
[0.500 to 1.500 / 1.000 / 0.001/step]
014 Corrct Coef:Y *ENG
Sets color-difference correction coefficient (Y)
for delta Vsp_Dif_Dash.
[0.500 to 1.500 / 1.003 / 0.001/step]
021 K2: Check *ENG [0.000 to 1.000 / 0.330 / 0.001/step]
031 Diffuse Corr *ENG [0.75 to 1.35 / 1.00 / 0.01/step]
3. SP Mode Tables
196
To Next Page
Loading...
Need help?
General
