044 Job End Supply *ENG
[0.000 to 1.000 / 0.450 / 0.001mg/cm^2/
step]
081 Max Counts *ENG
Sets the upper limit of number of toner refreshes
performs at the same time of process control.
[0 to 50 / 0 / 1/step]
3552 [Blade damage prevention mode]
001 Execution Temp. Threshold *ENG
Sets the temperature threshold of blade
damage prevention mode execution.
[0 to 50 / 50 / 1deg/step]
3553 [Transfer belt cleaning]
001
TransferIdleTime
Temperature:H
*ENG
[0.0 to 3.0 / 0.0 / 0.1revolutions/step]
002
TransferIdleTime
Temperature:M
*ENG
003
TransferIdleTime
Temperature:L
*ENG
004
TransferIdleTime
Temperature:L:ON
*ENG
005 Temperature Threshold:T2 *ENG [20 to 30 / 25 / 1deg/step]
006 Temperature Threshold:T1 *ENG [0 to 15 / 15 / 1deg/step]
007 Temperature Threshold:T3 *ENG [0 to 30 / 18 /1deg/step]
3555 [Execution Interval]
001 Charge AC Control Counter *ENG [0 to 2000 / 500 / 1page/step]
3600 [Select ProCon]
001 Potential Control *ENG
Sets the potential control mode.
[0 or 1 / 1:CONTROL / 1/step]
0:FIXED, 1:CONTROL
Main SP Tables-3
213
To Next Page
Loading...
Need help?
General
