002 LD Control *ENG
Sets the LD control mode.
[0 or 1 / 1:ON / 1/step]
0:OFF, 1:ON
003 TC Adj. Mode *ENG
Sets the execution timing for toner density
adjustment process control.
[0 to 2 / 1 / 1/step]
0:Do Not Execute
1:1st Power On
2:1st Power On & Job End
004 ACC Before ProCon *ENG
Selects the performance same as the process
control executed before ACC.
[0 to 2 / 2 / 1/step]
0:Not Execute
1:Process Control
2:TC Control
006 Pattern Cal. Method *ENG
[0 to 2 / 2 / 1/step]
0:FIXED
1:INITIALIZED
2:CALCULATED
3610 [Chrg AC Control]
001 Std Speed: K *ENG
Displays the charged AC control value
determined by charged AC control.
[0.00 to 3.00 / - / 0.01kV/step]
002 Std Speed: C *ENG
003 Std Speed: M *ENG
004 Std Speed: Y *ENG
3611 [Chrg DC Control]
3. SP Mode Tables
214
To Next Page
Loading...
