001 App. Switch Method *CTL
[0 or 1 / 0 / 1/step]
0: Soft Key Set
1: Hard Key Set
5166 [Auto Delete Time]
021 Auto Delete Time *CTL [0 to 4294967295 / 0 / 1/step]
5167
[Fax Printing Mode at Optional Counter Off]
Enables or disables the automatic print out without an accounting device. This SP is used
when the receiving fax is accounted by an external accounting device.
001
Fax Printing Mode at Optional
Counter Off
*CTL
[0 or 1 / 0 / 1/step]
0: Automatic printing
1: No automatic printing
5169
[CE Login]
If you will change the printer bit switches, you must ‘log in’ to service mode with this SP
before you go into the printer SP mode.
001 CE Login *CTL
[0 or 1 / 0 / 1/step]
0: Disabled
1: Enabled
5186
[RK4]
Enables or disables the prevention for RK4 (accounting device) disconnection.
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)", the machine
automatically jams a sheet of paper.
001 RK4 *ENG
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5188
[Copy NvVersion]
Displays the version number of the NVRAM on the controller board.
Main SP Tables-5
275
To Next Page
Loading...
Need help?
General
