001 Copy MvVersion *CTL [- / - / -]
5191
[Mode Set]
Shifts to the power save mode or not.
001 Power Str Set *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
5193
[-]
External controler settings.
001 - CTL
[0 to 10 / 0 / 1/step]
0: External Controller is not installed
1: EFI, 2: Ratio, 3: Egret
4: GJ, 5:Creo, 6: QX-100
7: Kurofune
8~10: Reserved
5195
[Limitless SW]
Sets limitless paper feed.
001 Limitless SW *CTL
[0 or 1 / 0 / 1/step]
0: Productivity priority
1: Limitless
5212
[Page Numbering]
This program adjusts the position of the second side page numbers.
A "– value" moves the page number positions to the left edge. A "+ value" moves the page
number positions to the right edge.
003 Duplex Printout Right/Left Position *CTL [-10.00 to 10.00 / 0.00 / 0.01mm/step]
004 Duplex Printout High/Low Position *CTL [-10.00 to 10.00 / 0.00 / 0.01mm/step]
3. SP Mode Tables
276
To Next Page
Loading...
Need help?
General
