001 SC Call *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
002 Service Parts Near End Call *CTL
003 Service Parts End Call *CTL
004 User Call *CTL
006 Communication Test Call *CTL
007 Machine Information Notice *CTL
008 Alarm Notice *CTL
009 Non Genuine Tonner Ararm *CTL
010
Supply Automatic Ordering
Call
*CTL
011
Supply Management Report
Call
*CTL
012 Jam/Door Open Call *CTL
5516
[Individual PM Part Alarm Call]
With @Remote in use, these SP codes can be set to issue a PM alarm call when one of SP
parts reaches its yield.
001
Disable/Enable Setting (0:Not
Send,1:Send)
*CTL
[0 or 1 / 1 / 1/step]
0: Not send, 1: Send
004
Percent yield for triggering PM
alert
*CTL [1 to 255 / 75 / 1%/step]
5610 [Base Gamma Ctrl Pt:Execute]
004 Get Factory Default ENG
Recalls the factory settings.
[- / - / -]
[Execute]
005 Set Factory Default ENG
Overwrites the current values onto the
factory settings.
[- / - / -]
[Execute]
3. SP Mode Tables
296
To Next Page
Loading...
