002
Facsimile *CTL [up to 20 / - / 1digit/step]
Sets the fax or telephone number for a service representative. This number is printed on
the Counter List.
This can be up to 20 characters (both numbers and alphabetic characters can be input).
003
Supply *CTL [up to 20 / - / 1digit/step]
Use this to input the telephone number of your supplier for consumables. Enter the
number and press #.
004
Operation *CTL [up to 20 / - / 1digit/step]
Use this to input the telephone number of your sales agency. Enter the number and press
#.
5816 [Remote Service]
001 I/F Setting *CTL
[0 to 2 / 2 / 1/step]
0: Remote service off
1: CSS remote service on
2: NRS remote service on
Selects the remote service setting.
002
CE Call *CTL
[0 or 1 / 0 / 1/step]
0: Start of the service
1: End of the service
Performs the CE Call at the start or end of the service.
NOTE: This SP is activated only when SP 5816-001 is set to “2”.
003
Function Flag *CTL
[0 or 1 / 0 / 1/step]
0: Disabled, 1: Enabled
Enables or disables the remote service function.
007
SSL Disable *CTL
[0 or 1 / 0 / 1/step]
0: Yes. SSL not used.
1: No. SSL used.
Controls if RCG (Remote Communication Gate) confirmation is done by SSL during an
RCG send for the @Remote over a network interface.
Main SP Tables-5
313
To Next Page
Loading...
