001
On/Off (1:ON 0:OFF) *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
002
Target (2: HDD 3: SD) *CTL
[2 or 3 / 2 / 1/step]
2: HDD, 3: SD Card
Selects the storage device to save debug logs information when the conditions set with
SP5-858 are satisfied.
005
Save to HDD *CTL [-999999 to 999999 / 0 / 1/step]
Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
006
Save to SD Card *CTL [-999999 to 999999 / 0 / 1/step]
Saves the debug log of the input SC number in memory to the SD card.
009
Copy HDD to SD Card(Latest
4MB)
*CTL
[- / - / -]
[Execute]
010
Copy HDD to SD Card(Latest
4MB Any Key)
*CTL
011 Erase HDD Debug Data *CTL
[- / - / -]
[Execute]
012 Erase SD Card Debug Data *CTL
013 Free Space on SD Card *CTL
[- / - / -]
[Execute]
014 Copy SD to SD(Latest 4MB) *CTL
[- / - / -]
[Execute]
015
Copy SD to SD(Latest 4MB
Any Key)
*CTL
016 Make HDD Debug *CTL
[- / - / -]
[Execute]
017 Make SD Debug *CTL
Main SP Tables-5
351
To Next Page
Loading...
Need help?
General
