5858
[Debug Save When]
These SPs select the content of the debugging information to be saved to the destination
selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of SC error
codes.
001
Engine SC Error *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by printer engine errors.
002
Controller SC Error *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by GW controller errors.
003 Any SC Error *CTL [0 to 65535 / 0 / 1/step]
004
Jam *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for jam errors.
5859
[Debug Save Key No.]
These SPs allow you to set up to 10 keys for log files for functions that use common
memory on the controller board.
3. SP Mode Tables
352
To Next Page
Loading...
