025
SMTP Auth. Direct Setting *CTL [0 to 255 / - / x2/step]
Selects the authentication method for SMPT.
Bit switch:
• Bit 0: LOGIN
•
Bit 1: PLAIN
• Bit 2: CRAM MD5
• Bit 3: DIGEST MD5
• Bit 4 to 7: Not used
• This SP is activated only when SMTP authorization is enabled by UP mode.
026
S/MIME: MIME Header Setting *CTL
[0 to 2 / 0 / 1/step]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
Selects the MIME header type of an E-mail sent by S/MIME.
028 S/MIME: Authentication Check *CTL
[0 to 1 / 0 / 1/step]
0: No (not check), 1: Yes (check)
5866 [E-Mail Report]
001
Report Validity CTL
[0 to 1 / 0 / 1/step]
0: Enable, 1: Disable
Enables/disables each function.
005 Add Date Field *CTL
[0 to 1 / 0 / 1/step]
0: Not add, 1: Add
5869 [RAM Disk Setting]
001
Mail Function *CTL
[0 or 1 / 0 / 1/step]
0: Use, 1: Not use
Set whether the RAM disk is used or not used when using the mail functions.
3. SP Mode Tables
354
To Next Page
Loading...
