5870 [Common keyInfo Writing]
001
Writing CTL
[- / - / -]
[Execute]
Writes to flash ROM the common proof for validating the device for @Remote
specifications.
003
Initialize CTL
[- / - / -]
[Execute]
Initializes the data area of the common proof for validating.
004 Writing:2048bit CTL
[- / - / -]
[Execute]
5873 [SDCardAppliMove]
001
MoveExec CTL
[- / - / -]
[Execute]
This SP copies the application programs from the original SD card in SD card slot 2 to an
SD card in SD card slot 1.
002
UndoExec CTL
[- / - / -]
[Execute]
This SP copies back the application programs from an SD card in SD Card Slot 2 to the
original SD card in SD card slot 1. Use this menu
when you have mistakenly copied some programs by using "Move
Exec" (SP5873-1).
5875 [SC Auto Reboot]
001
Reboot Setting *CTL [0 or 1/ 0 / 1/step]
Enables or disables the automatic reboot function when an SC error occurs.
0: The machine reboots automatically when the machine issues an SC error and logs the
SC error code. If the same SC occurs again, the machine does not reboot.
1: The machine does not reboot when an SC error occurs.
The reboot is not executed for Type A or C SC codes.
Main SP Tables-5
355
To Next Page
Loading...
