001 Switch Charge Mode *ENG [0 to 2 / 0 / 1/step]
5907 [Plug & Play Maker/Model Name]
001
Plug & Play Maker/Model/
Name
*CTL See detail below
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names should be
registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When the
setting is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
002
Print Application Timer *CTL [3 to 30 / 3 / 1sec/step]
Sets the amount of time to elapse while the machine is in standby mode (and the
operation panel keys have not been used) before another application can gain control of
the display.
5919 [State Of Encryption]
001 State Of Encryption *CTL
[0 or 1 / 0 / 1/step]
0: OFF (Not working)
1: ON (Working)
5967 [Copy Server Set Function]
001
(0:ON 1:OFF) *CTL
[0 or 1 / 0 / 1/step]
0: ON, 1: OFF
Enables and disables the document server. This is a security measure that prevents image
data from being left in the temporary area of the HDD. After changing this setting, you
must switch the main switch off and on to enable the new setting.
5974
[Cherry Server]
Specifies which version of ScanRouter, “Light” or “Full”, is installed.
Main SP Tables-5
359
To Next Page
Loading...
Need help?
General
