030 M. Cor.: Subdot: C *ENG [-1.00 to 1.00 / - / 0.01dot/step]
033 C. Left Mag.: Subdot: M *ENG [-32.00 to 32.00 / - / 0.01dot/step]
034 C. Right Mag.: Subdot: M *ENG [-32.00 to 32.00 / - / 0.01dot/step]
035 S. Cor.: 600 Line: C *ENG [-16384 to 16383 / - / 1line/step]
036 S. Cor.: 600 Sub: C *ENG [-1.000 to 1.000 / - / 0.001line/step]
037 S. Cor.: 1200 Line: C *ENG [-16384 to 16383 / - / 1line/step]
038 S. Cor.: 1200 Sub: C *ENG [-1.000 to 1.000 / - / 0.001line/step]
039 Skew: Y *ENG
[-5000.000 to 5000.000 / - /
0.001um/step]
047 M. Cor.: Dot: Y *ENG [-512 to 511 / - / 1dot/step]
048 M. Cor.: Subdot: Y *ENG [-1.00 to 1.00 / - / 0.01dot/step]
051 Y. Left Mag.: Subdot: M *ENG [-32.00 to 32.00 / - / 0.01dot/step]
052 Y. Right Mag.: Subdot: M *ENG [-32.00 to 32.00 / - / 0.01dot/step]
053 S. Cor.: 600 Line: Y *ENG [-16384 to 16383 / - / 1line/step]
054 S. Cor.: 600 Sub: Y *ENG [-1.000 to 1.000 / - / 0.001line/step]
055 S. Cor.: 1200 Line: Y *ENG [-16384 to 16383 / - / 1line/step]
056 S. Cor.: 1200 Sub: Y *ENG [-1.000 to 1.000 / - / 0.001line/step]
057 S. Cor.: 600 Sub *ENG [-1.000 to 1.000 / - / 0.001line/step]
059 S. Cor.: 1200 Sub *ENG [-1.000 to 1.000 / - / 0.001line/step]
061 Skew: K *ENG
[-5000.000 to 5000.000 / - /
0.001um/step]
2182
[Line Position Adj. Offset]
Sets the offset amount of the main scan or the sub-scan.
(Color) M. Scan: Main scan, S. Scan: Sub-scan
004 M. Scan: High: Dot: M *ENG [-512 to 511 / 0 / 1dot/step]
005 M. Scan: High: Subdot: M *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
5. System Maintenance
362
To Next Page
Loading...
Need help?
General
