008 M. Scan: Low: Dot: M *ENG [-512 to 511 / 0 / 1dot/step]
009 M. Scan: Low: Subdot: M *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
010 M. Scan: High: Dot: C *ENG [-512 to 511 / 0 / 1dot/step]
011 M. Scan: High: Subdot: C *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
014 M. Scan: Low: Dot: C *ENG [-512 to 511 / 0 / 1dot/step]
015 M. Scan: Low: Subdot: C *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
016 M. Scan: High: Dot: Y *ENG [-512 to 511 / 0 / 1dot/step]
017 M. Scan: High: Subdot: Y *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
020 M. Scan: Low: Dot: Y *ENG [-512 to 511 / 0 / 1dot/step]
021 M. Scan: Low: Subdot: Y *ENG [-1.00 to 1.00 / 0.00 / 0.01dot/step]
022 S. Scan: High: Line: M *ENG [-16384 to 16383 / 0 / 1line/step]
023 S. Scan: High: Subline: M *ENG [-1.00 to 1.00 / 0.00 / 0.01line/step]
026 S. Scan: Low: Line: M *ENG [-16384 to 16383 / 0 / 1line/step]
027 S. Scan: Low: Subline: M *ENG [-1.00 to 1.00 / 0 / 0.01line/step]
028 S. Scan: High: Line: C *ENG [-16384 to 16383 / 0 / 1line/step]
029 S. Scan: High: Subline: C *ENG [-1.00 to 1.00 / 0.00 / 0.01line/step]
032 S. Scan: Low: Line: C *ENG [-16384 to 16383 / 0 / 1line/step]
033 S. Scan: Low: Subline: C *ENG [-1.00 to 1.00 / 0.00 / 0.01line/step]
034 S. Scan: High: Line: Y *ENG [-16384 to 16383 / 0 / 1line/step]
035 S. Scan: High: Subline: Y *ENG [-1.00 to 1.00 / 0.00 / 0.01line/step]
038 S. Scan: Low: Line: Y *ENG [-16384 to 16383 / 0 / 1line/step]
039 S. Scan: Low: Subline: Y *ENG [-1.00 to 1.00 / 0.00 / 0.01line/step]
2193
[MUSIC Condition Set]
Line Position Adjustment: Condition Setting
Main SP Tables-2
363
To Next Page
Loading...
Need help?
General
