002
Page: Job End: BW+FC *ENG [0 to 999 / 500 / 1page/step]
Adjusts the threshold of the line position adjustment for BW and color printing mode after
job end.
003
Page: Job End: FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for color printing mode after job end.
004
Page: Interrupt: BW+FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for BW and color printing mode
during job.
005
Page: Interrupt: FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for color printing mode during jobs.
006
Page: Stand-By: BW *ENG [0 to 999 / 100 / 1page/step]
Adjusts the threshold of the line position adjustment for BW printing mode in stand-by
mode. The line position adjustment is done when the number of outputs in BW printing
mode reaches the value specified with this SP and the condition of SP2-193-008 or
SP2-193-009 is satisfied
007
Page: Stand-By: FC *ENG [0 to 999 / 100 / 1page/step]
Adjusts the threshold of the line position adjustment for BW printing mode in stand-by
mode. The line position adjustment is done when the number of outputs in color printing
mode reaches the value specified with this SP and the condition of SP2-193-008 or
SP2-193-009 is satisfied.
008
Temp. *ENG [0 to 100 / 5 / 1deg/step]
Adjust the temperature change threshold for the line position adjustment (Mode b:
adjustment once). The timing for line position adjustment depends on the combinations of
several conditions.
009
Time *ENG [1 to 1440 / 300 / 1minute/step]
Adjust the time threshold for the line position adjustment (Mode b: adjustment once). The
timing for line position adjustment depends on the combinations of several conditions.
010
Magnification *ENG [0.00 to 1.00 / 0.10 / 0.01%/step]
Adjusts the magnification threshold for line position adjustment. If the length of the main
scan is changed by this amount since the previous MUSIC, then MUSIC is done again.
5. System Maintenance
364
To Next Page
Loading...
Need help?
General
