002 Threshold 2 *ENG
[0 to 250 / 165 / 1mm/step]
Threshold 2 ≤ paper ≤ Threshold 1: Paper
is detected as "S2" size.
003 Threshold 3 *ENG
[0 to 250 / 139 / 1mm/step]
Threshold 3 ≤ paper ≤ Threshold 2: Paper
is detected as "S3" size.
2311
[Non Image Area:Bias]
Adjusts the bias of the paper transfer roller between images
001
Image Transfer *ENG [10 to 250 / 100 / 5%/step]
Adjusts the bias of the image transfer belt between images. This value is added to the
value of the image transfer belt bias.
002
Paper Transfer *ENG [0 to 230 / 0 / 1uA/step]
Adjusts the bias of the paper transfer roller between images.
2326 [Transfer Roller CL:Bias]
001
Positive:befor and after JOB *ENG [0 to 2100 / 250 / 10V/step]
Adjusts the positive voltage of the paper transfer roller for cleaning the paper transfer
roller.
002
Negative:befor and after JOB *ENG [10 to 995 / 100 / 10%/step]
Adjusts the negative current of the paper transfer roller for cleaning the paper transfer
roller.
003
Positive:befor and afterProcon *ENG [0 to 2100 / 2000 / 10V/step]
Adjusts the positive current limit of the paper transfer roller for cleaning the paper transfer
roller.
004
Negative:befor and afterProcon *ENG [10 to 995 / 100 / 10%/step]
Adjusts the negative current limit of the paper transfer roller for cleaning the paper transfer
roller.
005 Positive:prevention *ENG [0 to 2100 / 500 / 10V/step]
5. System Maintenance
368
To Next Page
Loading...
Need help?
General
