001 Disp Vsg reg(front) *ENG
[0 to 5.5 / - / 0.01V/step]
002 Disp Vsg reg(center) *ENG
003 Disp Vsg reg(rear) *ENG
011 Disp Voffset(front) *ENG
012 Disp Voffset(center) *ENG
013 Disp Voffset(rear) *ENG
3100 [Tonner End Detection: Set]
001 ON/OFF *ENG
Enables/disables the toner alert display on the
LCD.
[0 or 1 / 0 / 1/step]
0:Detect, 1:NotDetect
002 NE Detection *ENG
Sets the toner near end detection.
[0 or 1 / 0 / 1/step]
0:ALL, 1:TESensor
3101 [Toner Status: Display]
001 Bk *ENG
Displays the toner remainig status.
[0 to 2 / - / 1/step]
0: Full, 1: NE, 2:TE
002 C *ENG
003 M *ENG
004 Y *ENG
3102 [Toner Remaining: Display]
001 Bottle Motor: Bk *ENG
Displays the toner remainig amount calculated
with motor driving time.
[0.000 to 500.000 / - / 0.001g/step]
002 Bottle Motor: C *ENG
003 Bottle Motor: M *ENG
004 Bottle Motor: Y *ENG
5. System Maintenance
404
To Next Page
Loading...
Need help?
General
