3533 [Interrupt ProCon :Set]
001 Interval:Set:BW *ENG
Sets the page interval for interrupt process
control.
[0 to 5000 / 500 / 1sheets/step]
002 Interval:Disp:BW *ENG
Displays the page interval for interrupt process
control.
[0 to 5000 / - / 1sheets/step]
003 Corr(Short):BW *ENG
Sets the correction coeficient (Short) of page
interval for interrupt process control.
[0.00 to 1.00 / 0.10 / 0.01/step]
004 Corr(Mid):BW *ENG
Sets the correction coeficient (Mid) of page
interval for interrupt process control.
[0.00 to 1.00 / 1.00 / 0.01/step]
011 Interval:Set:FC *ENG
Sets the page interval for interrupt process
control.
[0 to 5000 / 200 / 1sheets/step]
012 Interval:Disp:FC *ENG
Displays the page interval for interrupt process
control.
[0 to 5000 / - / 1sheets/step]
013 Corr(Short):FC *ENG
Sets the correction coeficient (Short) of page
interval for interrupt process control.
[0.00 to 1.00 / 0.25 / 0.01/step]
014 Corr(Mid):FC *ENG
Sets the correction coeficient (Mid) of page
interval for interrupt process control.
[0.00 to 1.00 / 1.00 / 0.01/step]
3534 [JobEnd ProCon :Set]
001 Interval:Set:BW *ENG
Sets the page interval for job end process
control.
[0 to 5000 / 250 / 1sheets/step]
5. System Maintenance
412
To Next Page
Loading...
Need help?
General
