002 Switch to Print
Determines whether the installation date is
printed on the printout for the total counter.
[0 or 1 / 1 / - ]
0: OFF (No Print)
1: ON (Print)
003 Total Counter
Displays the total counter at set the setting
day (SP5849-001).
[0 to 99999999 / 0 / 1/step]
5851 [Bluetooth] *CTL
001
Mode
Sets the operation mode for the Bluetooth Unit. Press either key. [0:Public][1:Private]
5856
[Remote ROM Update]
Allows the technician to upgrade the firmware using a local port (IEEE1284) when
updating the remote ROM.
002 Local Port *CTL
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5857 [Save Debug Log] *CTL
001
On/Off (1:ON 0:OFF)
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
002
Target (2: HDD 3: SD)
Selects the storage device to save debug logs information when the conditions set with
SP5-858 are satisfied.
[1 to 3 / 2 / 1 /step]
1: IC card, 2: HDD, 3: SD card
5. System Maintenance
482
To Next Page
Loading...
