005
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
006
Save to SD Card
Saves the debug log of the input SC number in memory to the SD card.
009 Copy HDD to SD Card(Latest 4MB)
010 Copy HDD to SD Card(Latest 4MB Any Key)
011 Erase HDD Debug Data
012 Erase SD Card Debug Data
013 Free Space on SD Card
014 Copy SD to SD(Latest 4MB)
015 Copy SD to SD(Latest 4MB Any Key)
016 Make HDD Debug
017 Make SD Debug
5858
[Debug Save When] *CTL
These SPs select the content of the debugging information to be saved to the destination
selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of SC error
codes.
001
Engine SC Error
(0:OFF 1:ON)
Turns on/off the debug save for SC codes generated by
printer engine errors.
[0 or 1 / 0 / 1/ step]
002
Controller SC Error
(0:OFF 1:ON)
Turns on/off the debug save for SC codes generated by
GW controller errors.
[0 or 1 / 0 / 1/ step]
003 Any SC Error [0 to 65535 / 0 / 1 /step]
Main SP Tables-5
483
To Next Page
Loading...
