No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
821
CTL
D
Self-diagnostics error: CPU
[XXXX]: Detailed error code
[0B00]
ASIC error
The write-&-verify check error has occurred in the ASIC.
• Defective ASIC device
1. Replace the controller board.
[0D05]
CPU/Memory Error
• System firmware problem
•
Defective RAM-DIMM
•
Defective controller
1. Reinstall the controller system software.
2. Replace the RAM-DIMM.
3. Replace the controller.
[50A1]
Video bridge device (ASIC) error 1
The CPU does not detect the video bridge device.
• Defective I/F between the video bridge device and controller
[50A2]
Video bridge device (ASIC) register error 1
The CPU detects the video bridge device, but detects error data from the video
bridge device.
• Defective I/F between the video bridge device and controller
• For more details about this SC code error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
822
CTL
D
Self-diagnostic error: HDD
[XXXX]: Detailed error code
SC Tables
675
To Next Page
Loading...
