032 Mode Counter:CMY *ENG [0 to 999 / - / 1page/step]
033 Execution Interval: Setting:5 *ENG [0 to 999 / 20 1page/step]
034 High Coverage Threshold:5 *ENG [0.00 to 100.00 / 60.00 / 0.01%/step]
035 Application Time:5 *ENG [0 to 99 / - / 1sec/step]
2101
[Registration Correction]
These values are the parameters for the automatic line position adjustment and are
adjusted at the factory. However, you must input a value for SP2101-001 after replacing
the laser optics housing unit. The value should be provided with the new laser optics
housing unit.
001 Color Main Dot: Bk *ENG
[–512 to 511 / 0 / 1dot/step]
002 Color Main Dot: Ma *ENG
003 Color Main Dot: Cy *ENG
004 Color Main Dot: Ye *ENG
005 Color Sub Line: Bk *ENG
[–16384 to 16383 / 0 / 1line/step]
006 Color Sub Line: Ma *ENG
007 Color Sub Line: Cy *ENG
008 Color Sub Line: Ye *ENG
2102
[Magnification Adjustment]
These values are the parameters for the automatic line position adjustment and are
adjusted at the factory. These SPs must be input only when a new laser unit is installed.
001 Main Mag.: High Speed: Bk *ENG
[-1.000 to 1.000 / 0.000 / 0.001/step]
004 Main Mag.: High Speed: Ma *ENG
007 Main Mag.: High Speed: Cy *ENG
010 Main Mag.: High Speed: Ye *ENG
3. SP Mode Tables
72
To Next Page
Loading...
