028
Color Main Mag.: High Speed:
Ma
*ENG
[-1.000 to 1.000 / 0.000 / 0.001/step]031
Color Main Mag.: High Speed:
Cy
*ENG
034
Color Main Mag.: High Speed:
Ye
*ENG
2103
[Erase Margin Adjustment] (Area, Paper Size)
Adjusts the erase margin by deleting image data at the margins.
001 Lead Edge Width *ENG
[0.0 to 9.9 / 4.2 / 0.1mm/step]
002 Trail. Edge Width *ENG
003 Left *ENG
[0.0 to 9.9 / 2.0 / 0.1mm/step]
004 Right *ENG
005 Duplex Trail *ENG
[0.0 to 9.9 / 0.0 / 0.1mm/step]006 Duplex Left Edge *ENG
007 Duplex Right Edge *ENG
2104
[Unit LD Power Adj.]
Adjusts the LD initial power. These SPs must be input only when a new laser unit is
installed.
001 Bk *ENG
[60.0 to 140.0 / 100.0 / 0.1%/step]
002 Ma *ENG
003 Cy *ENG
004 Ye *ENG
2105
[LD Power Adj.]
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
001 High Speed: Bk *ENG [60.0 to 140.0 / 100.0 / 0.1%/step]
Main SP Tables-2
73
To Next Page
Loading...
