002 High Speed: Ma *ENG
[50 to 120 / 100 / 1%/step]
003 High Speed: Cy *ENG
004 High Speed: Ye *ENG
009 Low Speed: Bk *ENG
010 Low Speed: Ma *ENG
011 Low Speed: Cy *ENG
012 Low Speed: Ye *ENG
2106
[Polygon Rotation Time]
Adjusts the time of the polygon motor rotation.
001 Warming-Up *ENG [0 to 60 / 10 / 1sec/step]
002 Job End *ENG [0 to 60 / 0 / 1/step]
2107
[Image Parameter]
Adjusts image parameters.
001 Image Gamma Flag *ENG [0 or 1 / 1 / 1/step]
002 Shading Correction Flag *ENG [0 or 1 / 1 / 1/step]
2109
[Pattern Selection]
Generates the test pattern using "COPY Window" tab in the LCD.
003 Pattern Selection *ENG [0 to 23 / 0 / 1/step]
3. SP Mode Tables
74