003 Paper Transfer:1side *ENG
[100 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2678
[Thick2:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2679 [Thick2:EnvCorrectionTable]
015 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
016 Separation DC:2side *ENG
019 Separation DC:1side *ENG
020 Separation DC:2side *ENG
2690
[ITB Contact Setting]
Sets the image transfer belt contact for each paper.
001 Thick1 *ENG
[0 or 1 / 0 / 1/step]
002 Thick2 *ENG
003 Thick3 *ENG
014 Special4 *ENG
015 Special5 *ENG
016 Special6 *ENG
Main SP Tables-2
163
To Next Page
Loading...
Need help?
General
