2900 [Fus.Reload:DrumIdleTimeOffset]
001 Normal Speed *ENG
[0 to 30 / 0 / 1s/step]
003 Low Speed *ENG
2901
[Fus.Reload:DrumIdleTimeOffset]
Offset coverage for idling rotation time of drum when fusing down reloads.
001 Coverage:0-6% *ENG [-60 to 300 / 0 / 1sec/step]
002 Coverage:6-10% *ENG [-60 to 300 / -11 / 1sec/step]
003 Coverage:10-20% *ENG [-60 to 300 / -26/ 1sec/step]
004 Coverage:20-40% *ENG [-60 to 300 / -21 / 1sec/step]
005 Coverage:40%over *ENG [-60 to 300 / -21 / 1sec/step]
2903 [-] *ENG [0 to 65535 / 0 / 10msec/step]
002 FC OPC Brake ALL
003 Bk OPC/Image Transfer Brake ALL
2904 [-] *ENG [0 to 200 / 50 / 10msec/step]
002 FC OPC Reverse ALL
003 Bk OPC/Image Transfer Reverse ALL
2905 [Dev Rvs]
003
Time K ENG [0 to 200 / 0 / 10msec/step]
Sets the clutch on time at drum motor reverse.
004
Time Cl ENG [0 to 200 / 0 / 10/step]
Sets the time of development roller reverse rotation when color development motor rotates
in reverse.
005
Threshold Counter ALL ENG [0 to 400000 / 0 / 10mm/step]
Rotation threshould to determine if development roller reverse is required or not.
3. SP Mode Tables
164
To Next Page
Loading...
Need help?
General
